When you are in the process of constructing your home, one of the issues you will need to deal with is how to do the window construction properly. This is an issue that has to be taken seriously since any lapses could lead to other problems including having the building plans rejected, as well as finding out that you need to redo the entire project due to government restrictions.
You need to remember that during the process of any construction, various aspects of construction are guided by government policies. For instance, window work has to conform to HDB window work guidelines in order for it to be accepted as adequate. It’s important for one to be familiar with the minimum standards for window work including:
Installation of parapet windows
This is a process that will need you to get a permit according to the HDB window work guidelines. Not doing so is not allowed, and you may find yourself having to pay heavy fines on account of this. In addition to that, there are several other issues you need to keep in mind when in the process of constructing these kinds of windows. For one, the width of the window panels is also determined by the government. According to HDB window work guidelines, casement windows need to be within 500 and 700 mm thick. Sliding windows have to be within 500 and 1200 mm thick as well. In addition to that, the HDB window work guidelines also state that the windows that you replace in this setting have to be identical to the windows that you had before if you are doing a replacement.
Other regulations that concern this kind of window installation include the fact that the grilles that are installed have to be approved by the HDB. These need to be internally fixed and are not allowed to protrude from the façade of the building.
Glass Louvers
If you are going to get glass louvers for the house, you also need to keep in mind that there are some HDB window work regulations you need to be aware of. For instance, the glass needs to be more than 6mm thick, and should preferably be of the wire glass type. These measures are meant to increase the safety of the windows.
Aluminum casement windows
According to the HDB, aluminum casement windows also need to conform to a few specifications in order to be deemed safe. For one, they need to be more than 2.5mm thick, and the window leaf should also be less than 700 mm thick. There is also a specification for the minimum number of screws on each side of the friction stay.
Aluminum sliding windows
According to HDB window work specifications, these kinds of windows also need to have some safety features as well. These include a self-locking device a well as resin stoppers on the rails. In addition to that, the board also specifies that these kinds of windows have to have a maximum width that does not exceed 1.2 m.
As you can see, there is a lot that has to be thought through when you are interested in building a home in Singapore. The fact that there seem to be so many laws that govern how this should be done may make it seem difficult for one to get it done properly. However, the fact of the matter is that you really don’t need to struggle in order to end up with a house that meets the government specifications as well as your own design needs. All you have to do is be smart in the way that you get the help that you need in constructing such houses.
For instance, when you are interested in installing the windows for a commercial or residential property and need it to conform to all the HDB window work specifications above, you only need to find a qualified contractor to help you do it. Most of the high quality ones are conversant with these regulations, which means that it’s easy for them to determine which laws apply to the kinds of windows that you need to install. This means that by simply getting the right people to work with, you may not have to worry about conforming to such laws. This is an insight.